KLG - ML50
Product Description
Applications:
Albion EN70/80/85/245/246/247
Armstrong Sidley
BSA 8.9HP 4 Wheeler
Bull Nose Morris
Daimler
Dennis
Guy engines taking 18mm long reach
Leyland Cub
Morris Commercial engines taking 18mm long reach
Morris Cowley
Pashley
Raleigh 3 Wheeler
Villiers engines taking 18mm long reach
CLAE F-10 (Australian marine engine)
Riley 9 Owners please note :- The original plug was a Champion 16 which is now a Champion D9 1/2" Reach but Lodge also recommended a 3/4" Reach Lodge CB3. We do not recommend our ML50 as an alternative in this case.
Albion EN70/80/85/245/246/247
Armstrong Sidley
BSA 8.9HP 4 Wheeler
Bull Nose Morris
Daimler
Dennis
Guy engines taking 18mm long reach
Leyland Cub
Morris Commercial engines taking 18mm long reach
Morris Cowley
Pashley
Raleigh 3 Wheeler
Villiers engines taking 18mm long reach
CLAE F-10 (Australian marine engine)
Riley 9 Owners please note :- The original plug was a Champion 16 which is now a Champion D9 1/2" Reach but Lodge also recommended a 3/4" Reach Lodge CB3. We do not recommend our ML50 as an alternative in this case.
Additional Information
| SKU | 1522 |
| Manufacturer | KLG |
| Part Number | ML50 |
| Diameter | 18mm |
| Reach | 3/4" (19mm) |
| Hex Size | 1" (25.4mm) |
| Seal Type | Gasket Seat |
| Resistor | No |
| Terminal Type | M4 Thread |
| Electrode Material | Standard |
| Projection Type | Non Projected |
| Tip Configuration | Single Electrode |
The following product(s) can be used as an alternative
|
Lodge - CB3
£ 15.00
Out of stock
|
Lodge - CVHL
£ 15.00
Out of stock
|
Lodge - CVL
£ 15.00
Out of stock
|
|
Champion - 7COML
£ 15.00
Out of stock
|
AC - B11LR
£ 15.00
Out of stock
|
Disclaimer:
While every care has been taken in the development of the cross reference shown in the following section they are not always exact equivalents or necessarily interchangeable for all applications. For the correct application always consult the vehicle application section.
